How to Choose the Right Hydraulic Pump from Local Hydraulics Dealers

A good number of today’s amazing machines largely (if not entirely) rely on the capabilities of hydraulic pumps. These pumps act as sources of power by transferring catalytic liquid within machinery to make them lift, lower, open, close, or rotate components when deemed fit. Hydraulic pumps are widely known for their tremendous range and capability, though choosing the right one from local hydraulics dealers, like Hays Hydraulics from Aberdeen, might prove a bit difficult. Read on to know more.

It’s safe to say that no two hydraulic pumps are completely identical in both appearance and functionality (unless of course, if they’re of the same model or product series). Specifications are also quite wide-ranging in nature, which makes knowledge of a hydraulic system’s requirements all the more important. This level of variety allows for a diverse collection of applications, which is the main reason why choosing a single hydraulic pump is difficult in the first place.

One major consideration in choosing a hydraulic pump is capacity. Also known as the delivery rate, flow rate, or output, the capacity is typically measured in gallons/cubic inches per minute, or cubic inches per revolution in different operating conditions. Keep in mind that pump capacity ratings are also given at standard atmospheric inlet pressure and different output pressures, including approximate fluid service temperatures, so keep your eyes open at all times.

As previously stated, different types of pumps work like a charm for different situations. For instance, in the presence of a constantly applied load (i.e. a cylinder raising a heavy weight), a single piston or double-acting hydraulic pump would work best. If there’s little to no resistance at first, but an immense amount of force is later required, a two-speed dual piston pump would fit the bill. One good example is a press wherein a cylinder advances until it makes contact with a load, and subsequently applies a massive amount of bending or cutting force.

Since the world is raving about efficiency in virtually anything these days, hydraulic pumps are no exception. With these contraptions, an increase in pressure exerted on the pump merits a decrease in a pump’s flow rate, which in turn puts a dent on efficiency. Pump efficiency is described in both volumetric (ratio of actual delivery rate to theoretical displacement) and overall (ratio of hydraulic power output to mechanical power output) efficiencies, so be sure to look this up when visiting a nearby hydraulics dealer in Aberdeen for your supply needs.


How To Select Hydraulic Pumps,

How To Choose The Right Hydraulic Pump For You!, April 30, 2015

Hydraulic Pump Rating And Selection Factor,, October 25, 2011

How To Select A Hydraulic Pump,

Comments are closed.